The managed TP-LINK JetStream T2600G-28SQ switch allows to create a stable network environment and enjoy fast connections with 24 Gigabit SFP slots, 4 10/100/1000 Mb/s RJ45 ports and 4 10 G SFP+ slots. The switch has security features such as IP-MAC-Port binding, port protection, Storm Control and DHCP Snooping to protect against ARP or broadcast storm attacks. It also provides define the most common DoS attacks, providing better than ever protection against unwanted attacks. The use of access control lists (ACL, L2 to L4) blocks access to certain network resources. Refusal to forward packets can be set for specific source or destination MAC addresses, IP addresses, TCP/UDP ports and even VLAN identifiers. The JetStream T2600G-28SQ managed switch also uses 802.1X encryption, in combination with RADIUS/Tacs+ server functions, to authenticate users seeking to access the network.
The JetStorm T2600G-28SQ manageable switch supports Layer 2 switch functions, i.e. VLAN tagging (802.1Q), Port Mirroring, STP/ RSTP/MSTP, LACP, and data flow function (802.3x). It also supports advanced network security features such as loopback detection, cable diagnostics and IGMP Snooping. IGMP snooping technology provides the ability to switch multicast frames for selected users only, while IGMP throttling & filtering restricts user access to port level resources. The T2600G-28SQ also supports static Layer 2+ routing, which allows for easy network segmentation and increases network resource efficiency.
OAM 802.3ah, DDM, sFlow, QinQ, ID Insertion PPPoE L2TP, IGMP authentication and more, with these features, the T2600-28SQ is ideal for ISPs. DLDP (device connection detection) and OAM 802.3ah function will provide easier network surveillance and management. DDM (Digital Diagnostic Monitoring) function will be used to view the status of SFP modules connected to the switch and to configure alarm, warning, temperature threshold, voltage and power TX and Rx settings.
The T2600G-28SQ supports many IPv6 features, including dual stack IPv4/IPv6, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 interface, PMTU Discovery and IPv6 Neighbor Discovery, so that the configured network fully meets NGN requirements and no replacement of hardware will be necessary. The switch is extremely easy to use and manage, there are various ways to manage the device, e.g. through an intuitive web browser GUI (GUI) or command line interface (CLI), and with SSL or SSH you can be sure that our encryption is protected.
| Equipment features | |
| Standards and protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p, IEEE 802.3az |
| Ports | 24 Gigabit SFP slots 4 Combo ports RJ45 10/100/1000 Mb/s 4 SFP+ 10 G slots 1 RJ45 console port 1 Micro-USB console port |
| Network cabling | 10 BASE-T: Cat 3, 4 or 5 UTP cable (up to 100 m) 100 BASE-TX/ 1000 Base-T: Cat 5, 5e or higher UTP cable (up to 100 m) 1000 BASE-X: MMF, SMF 10 G BASE-X:MMF, SMF 10 G SFP+CU "SFP+ Direct Attach cable" (TXC432-CU1M, TXC432-CU3M) |
| Fanless | 2 |
| Power supply | 100~240 V AC, 50/60 Hz |
| Dimensions (S x G x W) | 440 x 220 x 44 mm (17.32 x 8.7 x 1.73 inches) |
| Installation | For mounting in a cabinet |
| Max. energy consumption | 29.67 W (220 V/50 Hz) |
| Amount of heat generated | 101.23 BTU/h |
| Performance | |
| Switching capacity | 128 Gb/s |
| Packet forwarding rate | 95.2 Mp/s |
| MAC address table | 16 K |
| Jumbo frames | 9216 bytes |
| Software functions | |
| Quality of Service function | Prioritization of CoS/DSCP traffic based on 802.1p 8 prioritization queues Prioritization queue: SP, WRR, SP+WRR Limitation of transmission depending on port, data flow Voice VLAN |
| L2 and L2+ functions | Static Routing DHCP Relay IGMP Snooping V1/ V2/ V3 LACP support according to 802.3ad standard (up to 14 groups, maximum 8 ports per group) Spanning Tree STP/ RSTP/ MSTP Filtering / BPDU protection TC/ Root Protect Feedback loop detection Data flow control 802.3x L2PT |
| VLANs | Support for 802.1Q up to 4000 VLAN and 4000 VLAN identifiers MAC/Protocol/ Private VLAN GARP/GVRP |
| Transmission security | IP-MAC-Port binding AAA Authentication based on IEEE 802.1X standard, Radius Protection against DoS attacks Dynamic protection against ARP (DAI) attacks SSH v1/ v2 SSL v2/ TLSv1 Port security Broadcast/ Multicast/ Unknown-unicast Storm Control |
| IPv6 | Dual IPv4/IPv6 stack MLD Snooping IPv6 ND MTU detection ICMPv6 TCPv6/ UDPv6 IPv6 ACL DHCPv6 Snooping IPv6 interface |
| IPv6 applications | DHCPv6 customer Ping6 Tracert6 Telnet (v6) IPv6 SNMP IPv6 SSH IPv6 SSL Http/ Https IPv6 TFTP IPv6 ACL IPv6 interface Routing IPv6 DHCPv6 relay DHCPv6 Snooping |
| Management | GUI browser interface, CLI command line interface SNMP v1/ v2c/ v3, compatible with TP-LINK public and private MIB libraries RMON (groups 1, 2, 3, 9) sFlow PPPoE Circuit ID DHCP relay DHCP server Customer DHCP/ BOOTP, DHCP Snooping, DHCP Option82 Dual Image CPU monitoring Port Mirroring SNTP time synchronization Integrated NDP/ NTDP protocol support Firmware update: via TFTP protocol and web browser Diagnostics: VCT test System logos, MIB public libraries Password recovery |
| Access control | Packet filtering based on source and destination MAC addresses L2～L4, IP address, TCP/UDP, 802.1p, DSCP, protocol and VLAN ID ports Limited in time |
| Other | |
| Certificates | CE, FCC, RoHS |
| Package contents | Switch Power Cable Installation instructions CD Mounting elements Rubber feet |
| System requirements | Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8, MAC® OS, NetWare®, UNIX® or Linux. |
| Working environment | Operating temperature: 0℃~40℃ (32℉~104℉); Storage temperature: -40℃~70℃ (-40℉~158℉) Operating air humidity: 10%~90%, non-condensing Storage humidity: 5%~90%, non-condensing |
