TP-Link Deco E4 3-Pack | WiFi Router | AC1200, Dual Band, Mesh, RJ45 100Mb/s

0
1
2
TP-LINK
KOD: TL-DECO E4(3-PACK)
EAN: 6935364086794

About product

Deco E4 - Dual-band Wi-Fi Mesh System for Your Home

Deco is the easiest way to guarantee a strong Wi-Fi signal in every corner of your home. This system will provide you with a fast and stable WiFi connection for a whole host of devices in any room of the house. If you're tired of lagging downloads or losing your internet connection, Deco E4 will provide you with a simple yet sophisticated way to get seamless Wi-Fi coverage. This home mesh system supports wireless speeds up to three times faster than previous generation routers and can support up to 100 Wi-Fi devices. The Deco units work together as one unified network, so you can enjoy faster speeds throughout your home without having to jump between networks.
deco-e4-1

Eliminate weak signal areas once and for all

The two-unit system can cover an area of up to 260 m2. It doesn't matter what your home is like. Enjoy uninterrupted connections no matter which part of the house you're in. And if you need more, simply add another Deco router to your network.
deco-e4-2

Move freely around your house!

The MESH system has a significant advantage - the devices automatically connect to the fastest Deco unit in your home. Move freely around your home and always have a perfect signal. Your end device will connect to the Deco router that is currently sending the best WIFI signal. This ensures that no matter where you are in the house, you will always enjoy an uninterrupted high-speed internet connection. Whether you are operating in the 2.4 GHz or 5 GHz band, the system will always select the correct frequency on your device.

Triple the network speed

The Deco E4 offers network speeds up to three times faster than the previous generation of routers by using 802.11ac technology and two bands for operation. In the 5 GHz band it reaches speeds of 867 Mbps, in the 2.4 GHz band it is 300 Mbps. Up to 100 devices can be connected to the unit without speed limit. Such a solution ensures smooth gaming and video playback in 4K.
deco-e4-4

Wi-Fi Mesh System easy to configure for expansion

Installing the TP-Link Deco E4 Mesh system is very simple. Just install the TP-Link Deco application and carefully follow the on-screen instructions. After a few minutes, your network will be up and running. You can also add more Deco units through the app to extend your coverage. . You can extend the range of your Mesh WiFi network at any time - just plug in another Deco router.
deco-e4-5

Specification

Specification

AC adapter input
100-240V ~ 50/60Hz 0,3A
Power supply output
12V ⎓ 1A
Ports
2 10/100Mb/s WAN/LAN ports , 1 power port
Button
1 reset button on the bottom
Flash
16 MB
SDRAM
128 MB
Dimensions
7.5 × 3.6 × 3.6 inches (190.5 × 90.7 × 90.7 mm)
Antenna type
2 internal dual-band antennas per Deco unit
Wireless standards
IEEE 802.11 ac / n / a 5 GHz, IEEE 802.11 b / g / n 2.4 GHz
Frequency
2.4 GHz and 5 GHz
Signal speed
867 Mbps in the 5 GHz band, 300 Mbps in the 2.4 GHz band
Transmission power
FCC: <30 dBm, CE: <20 dBm (2,4 GHz), <23 dBm (5 GHz)
Wireless protection
WPA-PSK / WPA2-PSK
Quality of service
WMM
WAN type
Dynamic IP / Static IP / PPPoE / L2TP / PPTP
Management
Local management, remote management
DHCP
Server, client
Firewall security
SPI firewall
Protocols
Supports IPv4 and IPv6
Guest network
2.4 GHz guest network x 1 5 GHz guest network x 1
Operating modes
Router, access point
Case law
CE, FCC, IC, NCC, BSMI, IDA, RCM, JPA, JRF, VCCI, KC, RoHS
Packaging Content
3 deco units 3 power supplies 1 RJ45 Ethernet cable
Smartphone / tablet requirements
iOS 9.0 or later, Android 4.4 or later
Environment
Operating temperature: 0℃~40℃ (32℉~104℉) Storage temperature: -40℉~70℃ (-40℉~158℉) Operating humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

FAQ

Pytanie: 1. What to do if Deco has stopped working?

I. Main Deco has stopped working

1. check that the modem is working

Disconnect the Main Deco from the modem, then connect your computer to the same Ethernet port on the modem using the same Ethernet cable. Next, verify that Internet is available on your computer.

If your computer cannot access the Internet, contact your Internet service provider or modem support.

2. check the LED status on the main Deco

1.) The LED lights steady green

Please refer to the link to update the Main Deco software.

2.) LED blinks or lights up red

Unplug the main Deco and the modem, turn off the modem and the main Deco and then turn them on again, wait 2 minutes when the lights on the modem are on, connect the main Deco back to the modem and then test the internet connection.

If the light is still red, go to Deco APP -> More -> Advanced -> IPv4 to check Deco's WAN IP address, if it is the IP address but Deco can't access the internet are in the link to change the DNS server to 8.8.8.8 and 8.8.4.4 to try.

3.) LED flashes blue

Use the link to reconfigure the main Deco.

4.) LED lights up yellow or is off

Please replace another power supply or power outlet.

3) Press the bottom reset button for one second to reset the main Deco if you have not tried to reset the main Deco before, then use the link to reconfigure the main Deco. If you have tried to reset the main Deco, do not reset it repeatedly.

II. Subordinate Deco has stopped working

1. check the status of the LED on the satellite deco

1.) LED lights up with a constant green light

Use this link to update the firmware of the subordinate Deco.

2.) LED flashes or lights up red

Move the Satellite Deco to the side of the main Deco, turn off the main Deco and the subordinate Deco, and then turn them on again, wait 2 minutes, and then test the Internet connection to the subordinate unit .

If there is still no Internet access, press the bottom reset button for one second to reset the Satellite Deco , then use the link to reconfigure the subordinate Deco .

3.) LED flashes blue

Use the link to reconfigure the subordinate Deco.

4.) LED lights up yellow or is off

Please replace another power supply or power outlet.

If you have not previously reset the subordinate Deco, reset the device first.

Find the reset button on the bottom of the Deco router, press it for one second to start the reset process. Wait about 2 minutes until the LED starts blinking blue, then use the link to reconfigure the subordinate Deco .

If you have previously reset your device, simply ignore this step.

III. A specific client is unable to access the Internet when connected to Deco, while other clients are working well with the Deco network.

1. verify that the client has acquired an IP address. If not, restart or reset the client.

2. verify that the client is configured with a static IP address. If so, change the client to automatically obtain an IP address.

3. update the client's wireless adapter driver.

4. verify that the client is included in a profile under Parental Control that is on hold or at bedtime.

If the above suggestions do not solve your problem, we suggest contacting TP-LinkTechnical Support

Pytanie: 2. What wireless devices can I use to configure and manage my Deco network?
Both iOS and Android devices are supported. They must also support Bluetooth 4.0 or later. Requirements: iOS 9.0 or later, Android 4.4 or later.
Pytanie: 3. can Deco replace my modem or router?
Deco is meant to replace most home routers. If your old router requires a modem to access the Internet, Deco should be used in conjunction with your existing modem.
Pytanie: 4. Can I use Deco with my current ISP?
Deco currently supports five types of Internet connections: PPPoE, Static IP, Dynamic IP, PPTP and L2TP. This means that Deco can work with most ISPs.
Pytanie: 5. Can Deco replace my modem or router?
Deco is meant to replace most home routers. If your old router requires a modem to access the Internet, Deco should be used in conjunction with your existing modem.

Pliki do pobrania

Information on the person responsible for the product and safety, compliance and warnings.

Details
Recommended products
Last seen
TP-Link Deco E4 3-Pack | WiFi Router | AC1200, Dual Band, Mesh, RJ45 100Mb/s