Tinycontrol | Rain sensor | 1x analog, 1x digital
KOD: LANKON-036
EAN:
EAN:
About product
Tinycontrol rain sensor
The sensor's task is to detect and measure rainfall. It has two outputs - one analogue and one digital, used depending on the demand. The digital output can take one of two states '0' or '1'. Analogue output allows to monitor rainfall intensity on the principle of voltage reading. The sensitivity of the module can be regulated by a potentiometer on the PCB.
The module can be connected to the Lan Controller in two ways:
- Output to the sensor to the digital input of the controller lan and we have information about the change of state during rainfall
- Output AO to INP1 or INP2 lan input of the controller, in the data window the value given is Volty.
Specification
Specification
Supply voltage
3.3V- 5 V
Outputs
Digital x1
Analogue x1
Dimensions
A module: 30 x 16 mm
The probe plate: 54 x 40 mm
FAQ
Pytanie: How to connect the module to the controller lan?
The module is connected with an optional cable terminated with a 2.54mm rechargeable plug. Pinout descriptions can be found on the board.
Pytanie: How do I mount the module?
There is a mounting hole in the board through which the module can be fixed to the ground with optional posts.
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen
