Teltonika RUTX12 | Industrial 4G LTE router | Cat 6, Dual Sim, 1x Gigabit WAN, 3x Gigabit LAN, WiFi 802.11 AC

Mobile module

2 x 4G (LTE) - Cat 6 to 300 Mbps, 3G to 42 Mbps

SIM / Module switching

2 SIM cards, one for each mobile module, automatic switching cases: weak signal, data limit, SMS limit, roaming, lack of network, refusal of network connection, data connection failure

Status

Signal strength, SINR, RSRP, RSRQ, Sent/received bytes, Mobile module in use

SMS

SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to TTP, SMS to SMS, SMS to SMS, SMS auto replay,

Black/white list

Yes

Band management

Band blocking, information about the band currently in use

APN

Auto APN

Brigde mode

Direct connection (bridge) between mobile ISP and LAN device

Wireless mode

802.11b/g/n/ac (WiFi 5) with data rates up to 867 Mbps (Dual Band, MU-MIMO) 802.11r with fast transition Access Point (AP) Station (STA)

WiFi security

WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP: AES-CCMP, TKIP, automatic encryption modes, client separation

ESSID

ESSID hiding mode

Wireless hotspot

Captive Portal (Hotspot), internal/external Radius server, possibility to personalize the target page

WAN

WAN port (can be configured as LAN) 10/100/1000 Mbps, IEEE 802.3, IEEE 802.3u, 802.3az, auto MDI/MDIX support

LAN

4 x LAN ports, 10/100/1000 Mbps, IEEE 802.3, IEEE 802.3u, 802.3az, auto MDI/MDIX support

Bluetooth 4.0

Bluetooth with low power consumption (LE) for short-range communication

Routing

Static Routing, Dynamic Routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)

Monitoring the connection

Ping Reboot, Wget reboot, cyclic reboot, LCP and ICMP for connection control

Firewall

Transfer of ports, traffic rules

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)

DHCP

Static and dynamic allocation of IP, DHCP Relay, Relay

DDNS

Supported >25 service providers, others can be configured manually

Failover

VRRP, mobile, wired or WiFi WAN options, each of which can be used as automatic emergency switching.

Load balancing

Balancing Internet traffic over multiple WAN connections

Authentication

Shared key, digital certificates, X.509 certificates

Firewall

Pre-configured firewall rules, can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack protection

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN

VLAN separation based on ports and tags.

WEB filter

Blacklist for blocking unwanted websites, White list to specify only allowed pages

Access control

Flexible access control for TCP, UDP, ICMP, MAC address filter

OpenVPN

Multiple clients and server can work simultaneously, 12 encryption methods

OpenVPN encryption

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec

IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

GRE

GRE tunnel

PPTP, L2TP

Client/server instances can operate simultaneously

Stunnel

Proxy designed to add TLS encryption functionality to existing clients and servers without changing the program code

DMVPN

Method of building scalable IPsec VPN networks

SSTP

Support for SSTP client instance

WEB UI

HTTP/HTTTPS, status, configuration, FW, CLI update, troubleshooting, event log, system log, kernel log

FOTA

Firmware update from the server, automatic notifications.

SSH

SSH (v1, v2)

SMS

SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET

CALL

Reboot, Status, Mobile data on/off, Output on/off

TR-069

OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

MQTT

MQTT Broker, MQTT publisher

SNMP

SNMP (v1, v2, v3), SNMP trap

JSON-RPC

HTTP/HTTPS management API

Modbus

Modbus TCP status/control

RMS

Teltonika Remote Management System (RMS)

Clouds of things

Allows monitoring of: Device data, Mobile data, Network information, Availability

ThingWorx

Allows monitoring of: WAN type, WAN IP Name of the mobile phone operator, Mobile phone signal strength, Mobile network type

Cumulocity

Allows monitoring: Device model, search and serial number, Mobile Cell ID, ICCID, IMEI, connection type, operator, signal strength, WAN and IP network type

Azure IoT Hub

Can send device IP address, Number of sent/received bytes/ 3G connection status, Network connection status, IMEI, ICCID, Model, Manufacturer, Serial number, Revision, IMSI, Sim State, PIN status, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN number for Azure IoT Hub server.

CPU

Quad-core ARM Cortex A7, 717 MHz

RAM

256 MB, DDR3

FLASH memory

256 MB Flash

WEB UI

Software update from file, checking the software on the server, configuration profiles, configuration backup

FOTA

Software/configuration update from server

RMS

Software/configuration update for multiple devices simultaneously

Keep the settings

Software upgrade without losing the current configuration

GNSS

GPS, GLONASS, BeiDou, Galileo and QZSS

Coordinates

GNSS coordinates via WebUI, SMS, TAVL, RMS

NMEA

NMEA 0183

Server software

Supported server software: TAVL, RMS

Geolocation of the mobile network

Approximate location of the device in RMS based on the position of the cell tower (without GPS)

Geofencing

Configurable multiple geofensive zones

Speed of data transfer

USB 2.0

Application

Samba

External devices

Possibility of connecting an external hard disk drive, pendrive, additional modem, printer (planned)

Storage formats

FAT, FAT32, NTFS

Entry

1x Digital input

Exit

1x Digital output

Events

SMS, Email, RMS

Connections

4-pin industrial DC power outlet

Input voltage range

9 - 50V DC, reverse polarity protection, overvoltage protection

PoE (passive)

Passive PoE 24V. Powered by LAN1 port, not compliant with IEEE802.3af and 802.3at standards.

Energy consumption

Idle: <4 W, Max: <22 W

Ethernet

5x RJ45, 10/100/1000 Mb/s ports

Inputs/Outputs

1x Digital input, 1x Digital output on 4-pin power connector

Status diodes

6 x Connection status LEDs, 6 x Connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1 x Power LED, 2.4GHz and 5GHz WiFi LEDs

SIM

2 SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM trays

Power supply

4-pin DC connector

Antennas

4x SMA for LTE, 2x RP-SMA for WiFi, 1x RP-SMA for Bluetooth, 1x SMA for GNNS

USB

USB A port for external devices

Reset

Restart / Reset user settings / Reset to factory settings

Housing material

All-aluminium housing

Dimensions (W x H x D)

132 x 44 x 95 mm

Weight

540 g

Mounting options

DIN rail (can be mounted on both sides)

Operating temperature

-40 C to 75 C

Operating humidity

10% to 90% non-condensing