Teltonika RUT200 | Industrial LTE Router | 4G/LTE Cat.4, 2x LAN 100Mb/s WiFi 2,4GHz, RMS
KOD: TELTONIKA RUT200
EAN: 4779051840229
EAN: 4779051840229
About product
Teltonika RUT200 industrial router
The Teltonika RUT200 offers the top-rated features of our all-time bestseller RUT240 and is compatible with networks in Asia, the CIS, the Middle East, Africa and South America.The RUT200 is a small, economical and powerful industrial LTE router for professional applications. The router provides high performance in LTE communication. It features a SIM card slot and connection status LEDs. External antenna connectors allow the use of higher gain antennas to increase LTE signal strength and easily find the best signal location.
4G LTE wireless network and Wi-Fi
Equipped with 4G LTE, Wi-Fi and two Ethernet ports, this model is ideal for quickly setting up primary and backup connectivity with remote management capabilities.
Multiple automation scenarios
Digital inputs and outputs combined with advanced RutOS software enable solution automation scenarios.
The perfect choice for many solutions
The Teltonika RUT200 is ideal for a variety of IoT and M2M solutions that require easy configuration, reliable networking and remote availability.
The standard set includes
- RUT200 router
- 9 W power supply
- 2 x LTE antennas (SMA male)
- 1 x WiFi antenna (RP-SMA male)
- Quick reference guide
- Packaging
- RMS flyer
Specification
Specification
Mobile module
4G (LTE) - Cat 4 up to 150 Mbps
3G - up to 42 Mbps
2G - up to 236.8 kbps
Status
Signal Strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, bytes sent/received
SMS
SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, EMAIL to SMS,
SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreplay, SMPP
Black/white list
Black/white list of operators
Bandwidth management
Band lock, display of bandwidth status in use
APN
Auto APN
Bridge mode
Direct connection (bridge) between mobile ISP and device in LAN
Passthrough
The router assigns its mobile WAN IP address to another device on the LAN
Multiple PDNs (optional)
Ability to use different PDNs to access multiple networks and services
(not available in standard FW)
Wireless mode
IEEE 802.11b/g/n, access point (AP), station (STA)
Wi-Fi security
WPA2-Enterprise - PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID
SSID stealth mode and access control based on MAC address
Wi-Fi users
Up to 50 simultaneous calls
Hotspot
Captive portal (hotspot), internal/external Radius server, embedded in a configurable landing page
WAN
1x WAN (can be configured for LAN) 10/100 Mbps,
IEEE 802.3, IEEE 802.3u compliant, supports Auto MDI/MDIX
LAN
1x LAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u standards,
automatic MDI/MDIX support
Routing
Static routing, dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6)
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS,
ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers for proper routing of VoIP packets
Call monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall
Port forwarding, network traffic rules, custom rules
DHCP
Static and dynamic IP allocation, DHCP relayd
QoS
Prioritization of traffic by source/destination, service, protocol or port, WMM, 802.11e
DDNS
>25 service providers supported, others can be configured manually
Network backup
VRRP, mobile, wired, Wi-Fi options, any of which can be used as a backup,
using automatic failover
Load balancing
Balancing Internet traffic across multiple WAN connections
SSHFS (optional)
Possibility of mounting a remote file system via SSH protocol (not available in standard software)
Authentication
Shared key, digital certificates, X.509 certificates
Firewall
Pre-configured firewall rules can be enabled via Web.UI,
Unlimited firewall configuration via CLI, DMZ, NAT, NAT-T
Preventing attacks
DDOS prevention (SYN protection, SSH attack prevention, HTTP/HTTPS attack prevention),
Port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN
Tag-based VLAN separation
Mobile limit control
Setting custom data limits for the SIM card
WEB Filter
Black list to block unwanted websites, white list to determine allowed sites
Access control
Flexible access control for TCP, UDP, ICMP packets, MAC address filters
OpenVPN
Ability to run multiple clients and servers simultaneously, 12 encryption methods
OpenVPN encryption
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC,
RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec
IKEv1, IKEv2, supports up to 4 IPsec VPN tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE
GRE tunnel
PPTP, L2TP
Client/server services can run simultaneously
Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers without changing program code
SSTP
SSTP client instance support
ZeroTier
ZeroTier VPN
WireGuard
WireGuard VPN client and server support
ID filtering
Reply to one identifier in the range [1;255] or any
Allow remote access
Allow access over WAN
Custom Registers
MODBUS TCP Custom Register Block requests that read/write to a file
inside the router and can be used to extend the functionality of the MODBUS TCP Slave
Supported functions
01, 02, 03, 04, 05, 06, 15, 16
Supported data formats
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first);
32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Protocol
HTTP(S), MQTT, Azure MQTT
MQTT Gateway
Enables sending commands to and receiving data from a MODBUS Master via an MQTT broker
Web.UI
HTTP/HTTTPS, status, configuration, FW update, CLI, troubleshooting,
event log, system log, kernel log
FOTA
Remote firmware update from server, automatic notifications
SSH
SSH (v1, v2)
SMS
SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET
Call
Restart, Status, WiFi on/off,
Mobile data on/off, Output on/off
TR-069
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystem
MQTT
MQTT Broker, MQTT publisher
SNMP
SNMP (v1, v2, v3), SNMP trap
JSON-RPC
API management over HTTP/HTTPS
MODBUS
MODBUS TCP status/control
RMS
Teltonika Remote Management System (RMS) - Teltonika Remote Management System
The cloud of things
Allows monitoring of: Device data, Mobile data, Network information, Availability
ThingWorx
Allows you to monitor: WAN Type, WAN IP Mobile Operator Name,
Cellular signal strength, Cellular network type
Cumulocity
Allows you to monitor: Device model, revision and serial number,
Mobile Cell ID, ICCID, IMEI, connection type, carrier, signal strength, WAN type and IP
Azure IoT Hub
Can send device IP, number of bytes sent/received/ 3G connection status, network link status,
IMEI, ICCID, model, manufacturer, serial number, revision, IMSI, Sim status, PIN status, GSM signal,
WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, operator, operator number,
connection type, temperature, Azure IoT Hub server PIN number
CPU
Mediatek MIPS 24Kc 580 MHz
RAM
128 MB, DDR2
Flash Memory
16 MB, SPI Flash
Web.UI
Update software from file, check software on server,
configuration profiles, configuration backup, restore point
FOTA
Software/configuration update from server
RMS
Software/configuration update for multiple devices
Save settings
Software update without losing current configuration
Operating System
RutOS (OpenWrt operating system based on Linux)
Supported languages
Busybox shell, Lua, C
Development tools
GPL package with included graphical environment
Inputs
1 x digital input,
0-5 V detected as logic low,
8-30 V detected as logic high
Outputs
1 x digital open collector output, max. output voltage 30 V, 300 mA
Event handling
SMS, EMAIL, RMS
Connector
4-pin industrial DC power connector
Input voltage range
9 - 30 VDC (4-pole industrial socket),
reverse polarity protection, surge protection >33 V DC 10 us max.
PoE (passive)
Passive PoE over spare pairs (available from hardware version 0007 and batch number 0010)
Power over LAN port, incompatible with IEEE802.3af, 802.3at and 802.3bt
Power consumption
6.5 W
Ethernet
2 脳 RJ-45, 10/100 Mbps
I/O
1 x digital input, 1 x digital output on 4-pin power connector
LEDs
3x connection type status LED,
5x connection strength LED,
2x LAN status LED,
1x Power LED
SIM
1x SIM slot (Mini SIM - 2FF), 1.8 V/3 V
External SIM tray
Power supply
4-pin industrial DC power connector
Antennas
2x SMA for LTE, 1x RP-SMA for Wi-Fi antenna
Reset
Buttons for restarting/restoring factory settings
Housing material
Aluminium housing with DIN rails, plastic panels
Dimensions
83 mm x 74 mm x 25 mm
Weight
125g
Mounting options
Bottom and side mounting holes on DIN rail
Ambient temperature range during operation
From -40掳C to 75掳C
Ambient humidity during operation
10% to 90%, non-condensing
Protection class
IP30
Regulations
CB
Standards
IEC 62368-1:2018 (CB Scheme).
FAQ
Pytanie: What is the difference between Teltonika RUT241 000000 and RUT241 010000 ?
The difference between the RUT241 000000 and RUT241 010000 is the different LTE/3G frequency bands.
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen
Teltonika RUT200 | Industrial LTE Router | 4G/LTE Cat.4, 2x LAN 100Mb/s WiFi 2,4GHz, RMS
