MikroTik S+C57DLC10D is a single-mode SFP+ module designed for data transmission at a speed of 10 Gbps over a distance of up to 10 km. SFP+ S+C57DLC10D module is equipped with 2 LC output connectors and supports CWDM technology. Transmission takes place through single-mode fibers at 1570 nm wavelength.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 10 Gbps |
| Transmission distance | 4-20km |
| Digital Diagnostics Monitoring (DDM) | Yes |
| Fiber optic connector | LC |
| Fiber ports quantity | 2 |
| Fiber type | SM (Single-Mode) |
| Interface type | SFP+ |
| Maximum data transfer rate | 10000 |
| Maximum transfer distance | 10000 |
| Number of products included | 1 |
| Product colour | Nickel |
| SFP transceiver standard | CWDM |
| SFP transceiver type | Fiber optic |
| Type of SFP duplex | Physical (two fibers) |
| Wavelength | 1570 nm, 1570, |
| Basic technical parameters | |
| Type of module | SFP+ |
| Data transfer rate | 10 Gbps |
| Distance | 10 km |
| Wavelength | 1570 nm |
| Type of transmission | Single-Mode |
| Duplex type | CWDM |
| Output connectors | 2 x LC |
| Operating temperature | 0°C to 70°C |
SFP+ is an extension of the SFP standard adapted to a transmission rate of 10 Gbit/s.
We check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special module, which is equipped with an RJ45 port.
