MikroTik S-C47DLC40D | SFP Module | CWDM, 1,25Gb/s, 1470nm, 2x LC, 40km, DDM, Single mode
EOL
Recommended products
About product
MikroTik's high-performance SFP S-C47DLC40D module
MikroTik S-C47DLC40D is an SFP module dedicated for optical lines with a maximum length of 40 km. It allows data transmission at 1.25 Gbps on 1470 nm wavelength. Fiber optic SFP 1.25 G module supports duplex CWDM. MicroTik S-C47DLC40D module is equipped with 2 LC connectors. It supports single-mode fiber optics.
Special features
- Transmission at 1.25 Gbps
- Transmission range 40 km
- Duplex CWDM
- Wavelength 1470 nm
- Single-mode optical fibre
- 2 LC output connectors
- DDM

Specification
Features / filters
Output connector
SFP module - port speed
Transmission distance
Digital Diagnostics Monitoring (DDM)
Fiber optic connector
Fiber ports quantity
Fiber type
Interface type
Maximum data transfer rate
Maximum transfer distance
Number of products included
Product colour
SFP transceiver standard
SFP transceiver type
Type of SFP duplex
Wavelength
Wavelength
Specification
Type of module
SFP
Transmission speed
1.25 Gbps
Distance
40 km
Type of transmission
Single-Mode
Wavelength
1470 nm
Output connectors
2 x LC
Duplex type
CWDM
FAQ
Pytanie: What is an SFP RJ45 module?
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special module, which is equipped with an RJ45 port.
Pytanie: Which SFP/SFP+ module should I use?
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then we select the fiber optic cable. Single mode fiber is usually used over longer distances, while multimode fiber is used over shorter distances.
Pytanie: What is SFP+?
SFP+ is an extension of the SFP standard adapted to a transmission rate of 10 Gbit/s.
Information on the person responsible for the product and safety, compliance and warnings.
DetailsLast seen

MikroTik S-C47DLC40D | SFP Module | CWDM, 1,25Gb/s, 1470nm, 2x LC, 40km, DDM, Single mode