MikroTik S-4554LC80D is a pair of single-mode SFP WDM modules allowing to set up a transmission using one optical fiber. The maximum throughput is 1.25 Gb/s and the maximum range is about 80 km. The modules are equipped with LC/UPC connectors. One SFP WDM cartridge simultaneously sends and receives the signal using two different waves, i.e. 1490 nm and 1550 nm.
| Features / filters | |
| Output connector | LC |
| SFP module - port speed | 1,25 Gbps |
| Transmission distance | Over 20km |
| Fiber optic connector | SFP |
| Fiber type | SM (Single-Mode), Single-mode, |
| Harmonized System (HS) code | 85176990 |
| Operating temperature (T-T) | -40 - 85 |
| Transmission distance (max) | 80 |
| Type of SFP duplex | Wavy (WDM) |
| Wavelength | 1490/1550 nm, 1550, |
| Basic technical parameters | |
| Optical output power | 0~+5 dBm |
| Rx reception sensitivity | Max. -25 dBm |
| LOS De-assert | Max. -26 dBm |
| LOS Assert | Min. -40 dBm |
| Wavelength | 1490 nm and 1550 nm |
| Capacity | 1.25 Gbps |
| Distance | 80 km |
| Operating temperature | -40°C to 85°C |
| Connection type | LC/UPC |
| Type of transmission | Single-Mode |
SFP+ is an extension of the SFP standard adapted for transmission speeds of 10 Gbit/s.
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then select the fiber optic cable. Single mode fiber is usually used for longer distances, while multimode fiber is used for shorter distances.
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special module, which is equipped with an RJ45 port.
