MikroTik S+31DLC10D | SFP+ Module | 10Gb/s, 1310nm, LC/UPC, 10km, Single mode
EOL
KOD: S+31DLC10D
EAN: 5902560365948
EAN: 5902560365948
SFP module - port speed: 10 Gbps
Transmission distance: 4-20km
Auto MDI/MDI-X: No
Fiber optic connector: LC
Fiber type: SM (Single-Mode)
Recommended products
About product
Powerful optical module Mikrotik S+31DLC10D
The MikroTik SFP+ 10G S+31DLC10D module is a single-mode SFP+ insert equipped with 2 LC optical connectors. It enables transmission at a speed of 10 Gbps over a distance of to 10 km. SFP+ fiber optic module has a wavelength of 1310 nm. Microtik S+31DLC10D is compatible with other products of this company, such as CCR1036-8G-2S+ and CCR1036-8G-2S+EM, as well as with devices of other manufacturers.
Special features
- 2 LC connectors
- 10 Gbps transmission speed
- Range up to 10 km
- Wavelength 1310 nm
- Compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM
- Fibre optic single-mode fibre
- Operating temperature from -40°C to 70°C

Specification
Features / filters
Output connector
SFP module - port speed
Transmission distance
Auto MDI/MDI-X
Fiber optic connector
Fiber type
Harmonized System (HS) code
Interface type
Maximum data transfer rate
Maximum transfer distance
Number of products included
SFP transceiver type
Single-mode fiber (SMF) supported
Type of SFP duplex
Wavelength
Wavelength
Specification
Type of module
SFP+
Type of transmission
Single-Mode
Port
2 x LC
Transmission speed
10 Gbps
Distance
10 km
Wavelength
1310 nm
Supported cabling
Single mode optical fibre
8.3/125, 8.7/125, 9/125, 10/125 µm
Operating temperature
-40°C~70°C
FAQ
Pytanie: What is an SFP RJ45 module?
The SFP RJ45 module allows you to connect Ethernet cables to the SFP sockets of your network devices via a special insert, which is equipped with an RJ45 port.
Pytanie: Which SFP/SFP+ module should be used?
Check if the ports on the device are SFP or SFP+ ports. The latter can operate at 10 Gbps. Then select the fiber optic cable. Single mode fiber is usually used for longer distances, while multimode fiber is used for shorter distances.
Pytanie: What does SFP+ mean?
SFP+ is an extension of the SFP standard adapted for transmission speeds of 10 Gbit/s.
Information on the person responsible for the product and safety, compliance and warnings.
DetailsLast seen

MikroTik S+31DLC10D | SFP+ Module | 10Gb/s, 1310nm, LC/UPC, 10km, Single mode