MikroTik LHG LTE6 kit (AU ver.) | LTE Router | RBLHGR&R11e-LTE6, LTE 300Mb/s, 1x RJ45 100Mb/s, 1xminiPCI-e, 1x SIM
EOL
KOD: RBLHGR&R11E-LTE6 AU VERSION
EAN:
EAN:
LTE category: Cat.6 (300Mb/s Download, 50Mb/s Upload)
Number of LAN ports: 1x 10/100BaseTX (RJ45)
Wireless network standards: HSPA+
Additional connectors / interfaces: SIM
Antenna gain: 11dBi - 20dBi
Recommended products
About product
MikroTik LHG LTE6 (AU ver.) kit
MikroTik RouterBoard LHG LTE6 kit is a new model from LHG series of MikroTik , suitable for 2G, 3G and LTE (cat. 6) networks. The kit consists of a radio, which is integrated with the antenna with energy gain
Simultaneous operation in multiple bands
The new LHG LTE6 kit features a CAT6 LTE modem, which enables carrier aggregation and allows simultaneous use of multiple bands, a huge advantage when there are many LTE users in an area, as it provides better response in congested environments, while providing better performance in weaker signal situations in rural areas.
Ideal equipment
RouterBoard LHG is equipped with one SIM slot,
Key features
- PoE power supply - 12-57 V DC (passive or 802.3af/at)
- Beamwidth - 25°
- 1 SIM slot
- Maximum throughput - 300 Mbps (downlink), 50 Mbps (uplink)
- RouterOS Level 3 system
- Aggregation of bands
- Power gain - 17 dBi
- 1 x 10/100 Mbps Fast Ethernet port
- Operation in 2G, 3G, LTE (Cat. 6) bands
Specification
Features / filters
Communication type
LTE category
Number of LAN ports
Wireless network standards
Additional connectors / interfaces
Antenna gain
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
LTE bands
RAM memory
Type of device power supply
Type of device power supply
Specification
Product code
RBLHGR
Architecture
MIPSBE
CPU
QCA9531
Number of processor cores
1
Nominal processor frequency
650 MHz
Licence level
3
RAM size
64 MB
Storage size
16 MB
Type of storage
Flash
Tested ambient temperature range
From -30°C to 60°C
Number of SIM Slots
1 x modem (micro-SIM)
Number of mini-PCI-e slots
1
SFP port
No data available
PoE-in
802.3af/at
PoE input, voltage
12–57 V
Number of DC inputs
1 (PoE-IN)
Maximum energy consumption
6 W
Ethernet Ports
1 Fast Ethernet 10/100 Mbps port
Energy gain of the antenna
17 dBi
Main beam width
25°
Category 2G
Grade 12
3G category
R7 (downlink 21 Mbps, uplink 5.76 Mbps)/R8 (downlink 42.2 Mbps, uplink 5.76 Mbps)
LTE Category
6 (uplink 300 Mbps, downlink 50 Mbps)
LTE FDD bands
1 (2100 MHz)/ 2 (1900 MHz)/ 3 (1800 MHz)/ 7 (2600 MHz)/ 8 (900 MHz)/ 20 (800 MHz)/ 5 (850 MHz)/ 12 (700 MHz)/ 17 (700 MHz)/ 25 (1900 MHz)/ 26 (850 MHz)
LTE TDD bands
38 (2600 MHz)/ 40 (2300 MHz)/ 39 (1900 MHz)
2G teams
2 (1900 MHz)/ 3 (1800 MHz)/ 5 (850 MHz)/ 8 (900 MHz)
3G bands
1 (2100 MHz)/ 2 (1900 MHz)/ 5 (850 MHz)/ 8 (900 MHz)
Set composition
LHG LTE6 unit
24 V, 0.38 A power supply
PoE injector
2 metal clamps
K-LHG mounting kit
FAQ
Pytanie: What is PoE power used for?
PoE allows the use of a single cable for both power and data transmission, saving money that would have been spent on purchasing and pulling cables for network devices and VoiP phones.
Pytanie: What is MikroTik RouterOS?
MikroTik RouterOS is a router operating system and software that allows the dedicated router to be a PC or Mikrotik RouterBoard.
Pytanie: What types of power supply are present in the presented MikroTik LHG LTE6?
The device is powered by PoE 12-57 V DC (passive or 802.3af/at).
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsLast seen

MikroTik LHG LTE6 kit (AU ver.) | LTE Router | RBLHGR&R11e-LTE6, LTE 300Mb/s, 1x RJ45 100Mb/s, 1xminiPCI-e, 1x SIM