MikroTik GESP+POE-IN | PoE Injector | Gigabit, with surge protection

EN
TheGESP PoE-IN is a passive PoE injector from MikroTik with surge protection. Use it with GESP devices for maximum security and peace of mind. Housed in a weatherproof IP-67 enclosure with a grounding cable and RJ45 socket and connector with protection, it protects 10/100/1000Mbps network devices from dangerous voltages caused by lightning and industrial interference. It protects both conventional Ethernet connections and lines using 802.af/at (PoE ) technology.
Your office has a telecommunications tower with radio equipment and several switches. On top of the tower, install a GESP lightning protection device in a new waterproof (IP67) housing. Now your radio equipment will be safe during a lightning storm. And in the office, connect the GESP POE-IN PoE injector to protect your switches and power your radio devices.
Features / filters | |
DC-in jack | Yes |
Ethernet LAN (RJ-45) ports | 2 |
Ethernet LAN data rates | 10,100,1000 |
Networking standards | IEEE 802.3af, IEEE 802.3at |
Operating temperature (T-T) | -40 - 70 |
Power over Ethernet (PoE) voltage | 700 |
RJ-45 input ports | 1 |
RJ-45 output ports | 1 |
Surge protection | Yes |
Basic general data | |
Manufacturer | Mikrotik |
Model | GESP POE-IN |
Type | Passive PoE injector |
Interface connectors | RJ45 |
ESD/EMP protection | Protection Transient current absorption in response to 100 V/s 1 kV/μs surge voltage ESD, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61643-21, ±8 kV contact, ±15 kV air |
DC spark breakdown voltage | 75 V @ 100 V/s |
Maximum impulse voltage of the spark gap | 700 V @ 1 kV/μs |
Disc spark current | 3 kA (8/20μs) |
Minimum insulation resistance | 1 G ohm @ 50V |
Maximum capacity | 4 pF @ 1 MHz |
Data line protection | RJ45 10/100/1000 Ethernet |
PoE support | Passive PoE |
IP degree of protection | IP67 |
Operating temperature | -40 to 70°C |
Yes, the GESP POE-IN device comes with a complete mounting kit.