Huawei MCUD1 10G | Card | dedicated for 5608T
KOD: MCUD1 10G
EAN:
EAN:
About product
Huawei MCUD1 10G
Huawei MCUD1 10G is a dedicated card for the 5608T base station. It contains an uplink module with four SFP slots, two of which are SFP+. The card also has a control module and an Ethernet port.
More power with an uplinked card
The control (uplink) board is designed for the OLT MA5608T Mini Control Unit Board. In the OLT terminal it is possible to use two boards of this type and to use the load sharing function.Better control with convenient interfaces
MCUD1 10G is highly functional. It has two SFP slots, two SFP+ (10Gb/s) slots, two ACT and RUN/ALM LEDs . In addition, it is equipped with a control module with four RJ-45 ports (Alarm IN, Alarm IN/OUT, Console/ESC and BITS/TOD).Specification
Specification
Switching capacity
256 Gbps in active / standby mode
512 Gbps in load sharing mode
Total capacity
10 Gbps in active / standby mode
20 Gbps in load sharing mode
MAC Address Table
32768
Maximum number of users
2048
Maximum number of multicast users
2048
Number of multicast channels (configurable)
4096
Number of mutlicast channels (simultaneously)
2000
IPv4 routing table
5120
IPv6 routing table
5120
ARP table
8192
Number of ACL rules
896
Maximum frame size
2052 bytes
Using the jumbo frame function: 9216
VRF (L3 VPN)
Yes
Operating temperature
From -25 to 65 degrees C
Power consumption
Static: 29 W
Maximum: 33 W
Dimensions
233 x 134 x 34 mm
Weight
1 kg
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen
