Extralink PERSES | Switch PoE | 8x Gigabit PoE/PoE+, 2x RJ45 Uplink Gigabit, 96W
KOD: EX.14312
EAN: 5903148914312
EAN: 5903148914312
Number of LAN ports: 10x [10/100/1000M (RJ45)]
Number of PoE ports: 8x [802.3af/at (1G)]
Output voltage: 48V
10G support: No
Basic switching RJ-45 Ethernet ports quantity: 10
About product
PoE switch for monitoring
Extralink PERSES is a 10-port PoE switch with 4 modes of operation: AI QoS mode, AI VLAN mode, AI Extend mode, and smart power mode. The AI QoS mode is ideal for use in monitoring, it makes the video data processed with the highest priority to ensure smooth image quality.
Port separation using VLAN functions
AI VLAN mode makes ports 1-8 are isolated from each other, which can effectively suppress broadcast storms and improve network performance.
Power supply for cameras up to 250 meters and real-time monitoring of equipment operation.
In AI Extend 1-8 mode, the ports can effectively transmit data and PoE power up to 250 meters, which is ideal for monitoring systems, cameras and access points. In AI PoE mode, the switch automatically detects the operating status of the connected device and when it detects that it is not working properly and automatically restarts the device.How does the PoE switch work?
The device supports the IEEE 802.3af/at standard, which automatically detects and identifies PoE devices that comply with the IEEE 802.3af/at standard and provides power to them, there is no need to worry about the possibility of damaging a device that does not need power through PoE if the switch detects that the device does not comply with the 802.3af/at standard and does not provide power to the device.Main features:
- AI Extend mode: ports 1-8 support 250 meters of power (use Cat5e or Cat6 cable)
- AI VLAN mode: Isolate ports 1-8 from each other
- AI QoS Mode: Adjust the priority of video data packets. Transmission of video surveillance is smoother
- AI PoE Mode: Automatically detects devices that are not responding, turns off the PoE power on the port to which the device is connected and restarts the power supply
- IEEE 802.3af/at support
- Auto MDI/MDIX support
- Store-and-forward
- Power circuit protection, to protect terminal equipment
- Fanless design to save energy
- Energy saving function on unused ports
Specification
Features / filters
LAN standard
Number of LAN ports
Number of PoE ports
Output voltage
10G support
Basic switching RJ-45 Ethernet ports quantity
Basic switching RJ-45 Ethernet ports type
Depth
DIN rail mounting
Fiber uplink ports quantity
Gigabit Ethernet (copper) ports quantity
Height
Housing material
LED indicators
MAC address table
Management
Networking standards
Power (W)
Power connector
Power over Ethernet (PoE)
Power over Ethernet (PoE) ports quantity
Power over Ethernet (PoE) type supported
Power source
Power supply included
Product colour
Quality of Service (QoS) support
Rack mounting
Reset button
Stackable
Switch layer
Switch type
Switching capacity
Switching layer
Type of case
Uplink ports quantity
Weight
Width
Specification
Network Interfaces
8 ports 10/1000 Mb/s, RJ45, PoE
2 ports 10/1000Mbps, RJ45, without PoE power supply
Data transfer rate
1000 Mb/s Full Duplex
Network protocols and standards
IEEE802.3i, IEEE802.3u, IEEE802.3x, IEEE802.3af, IEEE802.3at
Performance
Throughput: 20 Gb/s
Frame filtering and transmission speed
Maximum 1488000 pps
LED lights
Power supply, LINK/ACT
PoE power supply (pins)
1/2/4/5(+), 3/6/7/8(-)
Power
Max power output of a single port: 36W
Maximum power of the whole device: 96W
Dimensions
Size: 184 mm * 94 mm * 27 mm
Weight: 0.5 kg
Environmental features
Operating temperature: 0°~40°C
Working humidity:: 10%~90%, non-condensing
EMC
CEClassB, FCCPart15, ClassB, VCCIClassB, C-Tick
Pliki do pobrania
Information on the person responsible for the product and safety, compliance and warnings.
DetailsRecommended products
Last seen
Extralink PERSES | Switch PoE | 8x Gigabit PoE/PoE+, 2x RJ45 Uplink Gigabit, 96W
