EN
The 802.11ac Wave 2 e600 MIMO (MU-MIMO) Access Point is a high-powered device with gigabit speeds, beamforming technology, and a 4x4 antenna array. cnPilot™ e600 Indoor is ideal for applications that require increased throughput, coverage, and support for large numbers of users, from school classrooms to shopping malls.
Management of the cnPilot e600 via the cnMaestro ™ cloud controller or a local controller includes:
Cambium e600 supports seamless roaming, up to 2048 Clients maximum, without the need for a controller on the network. The built-in hotspot WEB Portal enables management of the 2048 Customer base without the need to connect the structure to an external cnMaestro controller. The complete adaptation process is possible inside the standalone AP e600.
Earn money on your Wi-Fi service with cnMaestro's Guest Access features, which support network access systems based on mechanisms such as social login (access for liking a page), coupons for temporary access (a pre-configurable set of rules, called time-based or volume-based policies) and gateways for payment (e.g. by card). These features make the e600 ideal for use in dormitories, hotels, coffee shops, campgrounds or conference rooms, providing office access for guests.
Implementation of operation in MESH mode with other, any Cambium device allows to comfortably extend the range of propagated Wi-Fi network in places where there is no LAN infrastructure for direct connection of AP.
As an access AP, the e600 provides a maximum transmit power of 28 dB and supports 4x4: 4 MU-MIMO at 5 GHz, offering more flexibility than ever in terms of coverage and throughput. Autonomous bandwidth management features AutoRF, radio power management, and Airtime fairness (support for users with weaker signals or slower supported maximum speeds of the client Wi-Fi card). Implementing these mechanisms results in higher link speeds being delivered to client devices and your Wi-Fi network adapts to dynamic client behavior.
With the ability to support 512 simultaneous clients, up to 16 SSIDs, and two onboard Active/Standby memory modules, the e600 is ideally suited for high-density environments, and the redundancy in the memory modules meets today's High Availability (HA) requirements, which translates directly into greater security when using this AP e600 compared to similar solutions from competitors.
When you buy the e600, you get a free, top-of-the-line cnMaestro controller elevated to the cloud, reducing the cost of maintaining such a managed AP indisputably. Furthermore, expanding a Wi-Fi network based on Cambium devices costs nothing as there are no hidden license fees limiting the number of devices connected to the controller. Therefore, it's safe to say that e600 AP based on 802.11ac Wave 2 is one of the most competitively priced 4x4 access points.
Features / filters | |
LAN standard | Gigabit Ethernet 10/100/1000 Mb/s |
Number of LAN ports | 2x 10/100/1000BaseTX (RJ45) |
Operating frequency | Dual Band (2.4GHz, 5GHz) |
Wireless network standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ac Wave 2, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, |
Antenna gain | Under 10dbi |
Antenna type | Integrated |
Application | Indoor |
MIMO Type | 2x2 |
Type of device power supply | PoE 802.3af/at, Power supply, |
Variant | Without PoE injector |
Supported wireless standards | IEEE 802.11a/b/g/n/ac Wave 2 |
IEEE 802.11d/e/h/i/k/r/u/v/w | |
Modulation BPSK, QPSK, CCK, 16/64/256-QAM | |
Radio modes | DSSS, OFDM |
MIMO | 2.4 GHz: 2x2: 2 MU-MIMO |
5 GHz: 4x4: 4 MU-MIMO | |
Beamforming | Yes |
Supported channel widths | 20 MHz, 40 MHz, 80 MHz |
Maximum number of connected clients at one time | 512 |
Maximum number of simultaneous SSIDs | 16 |
Transmission power | 2.4 GHz: 24 dBm |
5 GHz: 28 dBm | |
Antenna gain | 2.4 GHz: 5.25 dBi |
5 GHz: 6 dBi | |
Maximum bandwidth for transmitted data | 2.4 GHz: 400 Mbps |
5 GHz: 1733 Mbps | |
Antenna | Integrated, dual polarized, linear, omnidirectional |
Bluetooth | Yes. BLE with 3.9 dBi antenna |
Ethernet Ports | 2 x Gigabit Ethernet (10/100/1000 Mbps) with autonegotiation |
Additional functions supported by the radio module | Maximum ratio combining (MRC) |
Cyclic delay/shift diversity (CDD/CSD) | |
Space-time blocking coding (STBC) | |
Low-density parity check (LDPC) | |
Packet aggregation: A-MPDU, A-MSDU | |
Wi-Fi Alliance | Wi-Fi certified a, b, g, n, ac |
WPA2 - Enterprise, Personal | |
WMM, Passpoint | |
Functions - Wi-Fi features | |
Management | Controller elevated to the cnMaestro cloud |
cnMaestro as a local controller - VMware package | |
Standalone - AP as a controller via http/https, CLI telnet/ssh | |
EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST | |
Management frames - protected by 802.11w protocol | |
RF management | Automatic channel and power management of the radio transmitter |
Access for guests | Configurable access portal under the supervision of cnMaestro |
Captive Portal | Possibility of integration with 3rd party Guest Access Portals |
Embedded portal on AP | |
LDAP and RADIUS authentication | |
Walled Garden with DNS whitelisting | |
Ability to manage access for wired and wireless clients | |
Network bandwidth control | Static and dynamic speed limiting possible: per client, per WLAN |
Customer isolation | Yes. Within the AP, across the network |
Fast roaming | 802.11r, Opportunistic Key Caching, Enhanced Roaming |
Airtime | Airtime Fairness, Band Steering, Band Balancing |
Support for AAA | RADIUS authentication, based on entries, dynamic |
Authentication (CoA, DM), Server failover, load-balancing | |
QoS | 802.11e/WMM QoS, DSCP/ToS mapping |
Ethernet (L2) | 802.1p/802.q, VLAN assigned to RADIUS, VLAN assigned to SSID |
Services | VLAN pooling, LLDP, IGMP Snooping (V1/V2/V3) |
Mesh | WDS-based Mesh with single and multiple hop support (packet routing through more than one intermediary point based on MESH internal routing) |
Embedded network service servers | NAT, DHCP server |
cnMaestro - network controller and manager | |
Flexible installation | Cloud or VM image - VmWare package |
Network management | Centralized configuration, statistics, event handling, software updates |
Hierarchical Views | Possibility of building a network topology in the cnMaestro panel, reproducing its physical layout, including division into floors |
Floor plans/floor manager | Enables upload of building plans for future AP deployment by drag and drop - visualization of AP deployment in the management panel |
RESTful APIs | Yes. Like any API it provides a platform to communicate with third party applications |
Supported radio path frequency range | 2.400 to 2.2484 GHz |
5.150 to 5.250 GHz | |
5.250 to 5.350 GHz | |
5.470 to 5.725 GHz | |
5.725 to 5.850 GHz | |
Check the version information for your region! | |
Dimensions | 18.0 x 18.0 x 4.2 cm (7.1 x 7.1 x 1.65 in) |
Weight | 558 g (1.2 lb) |
Operating humidity | 10% to 95%, non-condensing |
Operating temperature | 0°C to 50°C (32°F to 122°F) |
Power consumption | 17.2 W (max.) |
LED indicators | Three-color, software-controlled LED |
On-site theft protection | Yes. Kensington key slot |
MTBF - Mean Time Between Failures | 1,025,801 hours at 50°C, 2,828,686 hours at 25°C |
USB | Yes. 1x USB 2.0 port |
Reset button | Yes |
Certificates | FCC, CE, IC, UL |
EN60601-1-2 (EMC medical) | |
UL2043 Plenum | |
WEEE/RoHS compliance | |
Mounting options | Wall and ceiling mount bracket. Optional desk stand |
T-Bar: 14 mm, 24 mm, 38 mm | |
802.1x authentication with different EAP types | |
WPA-PSK, WPA2-PSK, WPA2-Enterprise | |
Wi-Fi network security | WPA-TKIP, WPA2-AES, 802.11i |
Dynamic SSID service | By time/date, by monitored host (possibility to enable or disable SSID broadcast according to pre-configured time rules) |
MAC authentication | MAC address filtering list on the device |
MAC address filtering list on controller | |
RADIUS MAC Authentication | |
Ability to report detection of a known MAC address to the Captive Portal | |
Firewall | Layer 2, Layer 3 and DNS ACLs, DoS protection |
DHCP Relay | Supported, according to the rules for option-82 |
NMS monitoring | SNMP v1, v2c, v3 |
API Interfaces - Customer Monitoring | Customer Presence/Location API |
DNS, NAT and TCP connection logging | |
Time synchronization | Automatic (from controller), NTP |
Troubleshooting tools - built-in | Packet capture, spectrum analyzer |
Ping, Traceroute, Syslogs | |
Tunneling of traffic | L2TP, L2oGRE, PPPoE |
Integrated captive portal for visitors | Configurable welcome pages |
SMS OTP authentication | |
Payment gateway support | |
Authentication based on pre-defined coupons | |
Ordering - Part Numbers of available device versions | |
Social login (e.g. for Like) | |
PL-E600PUSA-US | cnPilot E600 Indoor (FCC, US Plug) 802.11ac Wave 2, 4x4, AP with PoE Injector |
PL-E600PEUA-EU | cnPilot E600 Indoor (EU, EU cord) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PXXA-RW | cnPilot E600 Indoor (ROW, cable free) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PEUA-RW | cnPilot E600 Indoor (ROW with UE cable) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PUKA-EU | cnPilot E600 (EU with UK plug) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PUKA-RW | cnPilot E600 (ROW with UK plug) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PUSA-RW | cnPilot E600 (ROW with US plug) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PINA-RW | cnPilot E600 (ROW with connector for India) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PCNA-RW | cnPilot E600 (ROW with China plug) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PANA-RW | cnPilot E600 (ROW with plug for AUS/NZ) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PBRA-RW | cnPilot E600 (ROW with Brazilian plug) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PARA-RW | cnPilot E600 (ROW with plug for Argentina) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600X00A-US | cnPilot E600 Indoor (FCC) 802.11ac Wave 2, 4x4, AP |
PL-E600X00A-EU | cnPilot E600 Indoor (EU) 802.11ac wave 2, 4x4, AP |
PL-E600X00A-RW | cnPilot E600 Indoor (ROW) 802.11ac Wave 2, 4x4, AP |
PL-E600X00A-JP | cnPilot e600 Indoor (Japan) 802.11ac Wave 2, 4x4, AP |
PL-E600X00A-IL | cnPilot e600 Indoor (Israel) 802.11ac wave 2, 4x4, AP |
PL-E600X00A-LK | cnPilot e600 Indoor (Sri Lanka) 802.11ac Wave 2, 4x4, AP |
PL-E600X00A-CA | cnPilot e600 Indoor (Canada) 802.11ac Wave 2, 4x4, AP |
PL-E600X00A-EG | cnPilot e600 Indoor (Egypt) 802.11ac wave 2, 4x4, AP |
PL-E600PJPA-JP | cnPilot e600 Indoor (Japan, Japan Type A) 802.11ac Wave 2, 4x4, AP with PoE injector |
PL-E600PILA-IL | cnPilot e600 Indoor (Israel, Israel Type H cord) 802.11ac wave 2, 4x4, AP with PoE injector |
PL-E600PINA-LK | cnPilot e600 Indoor (Sri Lanka, India, Type D) 802.11ac wave 2, 4x4, AP with PoE injector |
PL-E600PUSA-CA | cnPilot e600 Indoor (Canada, US cable Type B) 802.11ac wave 2, 4x4, AP with PoE injector |
PL-E600PEUA-EG | cnPilot e600 Indoor (Egypt, Europe, Type C) 802.11ac Wave 2, 4x4, AP with PoE injector |
N000000L034A | Gigabit PoE Injector for cnPilot E600, output power 30 W at 56 V |
AX-12VDCXXA-WW | Power supply DC 12 V/3.3 A (without cable) |