Arris X5 Mesh extender - WiFi 6 in your home!

Arris X5 Mesh Extender X5042

Arris X5 Mesh extender (model X5042) is a device used for transmitting and extending WiFi signal. Access Point for use only indoors, away from unfavorable conditions such as humidity or high temperature. It has been equipped with open source software and licenses (the manufacturer's website provides information on how to use this kind of software). The small device is made of good quality plastic in grayish-white color. Modern design ensures that it matches most interiors. There are two Ethernet ports (so the devices in the mesh network can connect to each other not only via WiFi, but also via LAN port), WPS button, reset button, power input, and LED that switches off the device after 10 minutes.

Contents of the package

In a well-designed compact package we find:

Arris X5 Mesh extender
Power supply with a cable length of about 1.5 m
User manual in Polish

keyboard_arrow_left

keyboard_arrow_right

Configuration

Before starting the configuration itself, it is worth to know the meaning of the LEDs:

Fast blinking green - device is starting up
Slowly blinking green - device on: no network connection
Solid green - Full connection to the wired network
Solid yellow - Limited connection to the wired network
Solid red - Low wired network connection
Green light - X5 position is correct
Solid yellow - X5 is far from router
Solid red - X5 too far from router
Flashing green - WPS is in process

Control over the access point can be obtained by any mobile device. Just download the Arris WiFi Home application from Google store by scanning the QR code.

We start the configuration by connecting the device to the power supply and the Internet via a cable to the chosen Ethernet port (the LED will start blinking green and change to green within a minute).

keyboard_arrow_left

keyboard_arrow_right

Scan the QR code or go to the page from which you download the application:

For android devices: https://play.google.com/store/apps/details?id=com.arris.WiFiHome
For iOS devices: https://apps.apple.com/us/app/id1506183147

Follow the steps shown on the screen - set the language and accept the terms and conditions. There will be a prompt to agree to find devices and connect with them.

keyboard_arrow_left

keyboard_arrow_right

The next step is to add our Arris X5 X5042 device in the application

keyboard_arrow_left

keyboard_arrow_right

Once you have configured the first device, adding more devices is a breeze - just plug in the next device, press the WPS button on the first device, and then on the second. In the application use "add mesh extender" and follow the instructions

keyboard_arrow_left

keyboard_arrow_right

Successful pairing of the devices will result in a glowing LED representing the quality of the connection between one device and the other (ideally it should be lit solid green, then the quality of the connection is the best).

Tests

We started our tests by verifying the maximum speed performance of the LAN and iperf3 server. The device was connected to a 10/100/1000Mbps network card to a switch. We obtained the following maximum speeds for a single TCP stream: download 894Mbps, upload 958Mbps. Access points in the network were connected with each other in mesh mode only, i.e. wirelessly. The boot process ran without any problems.

The results of our measurements are presented below

Download Speed:

keyboard_arrow_left

keyboard_arrow_right

Upload speed:

keyboard_arrow_left

keyboard_arrow_right

We made a signal map using the AirSurvey software. To read the signal levels correctly please pay attention to the color legend at the bottom of the picture. The devices placed on the ground floor have been marked with icons showing their location. The Arris X5 access point in measurement point 1 has been connected to the switch via 1Gbps Ethernet port.

Summary

Using Arris X5042 you will be able to easily build the latest generation of WiFi 6 network in your home. Arris X5042 can work as a single Access Point or as a backbone Easy Mesh network. By connecting additional X5042 devices, you can build a unified home network, which will allow you to move freely without losing range on your devices such as tablet or laptop. This product has built-in 2x2 Wi-Fi 6 (IEEE 802.11ax) @2.4 GHz and 4x4 Wi-Fi 6 (IEEE 802.11ax) @5 GHz antenna systems. The dual frequency operation will allow all home devices to find a convenient operating band. An important feature of Arris X5 is its aesthetic casing. It can be simply displayed as a decoration and there is no need to hide the device. For management, the manufacturer has provided a dedicated application to download from the Google Play store or iStore. ARRIS Wi-Fi Home is a scalable and flexible cloud services platform for managing a multi-point Wi-Fi mesh network to provide fast, reliable Wi-Fi throughout the home, easy to install and manage by the user.

Benefits:

auto configuration of a newly added device in the mesh network
automatic roaming between devices in the mesh network
mobile application for zone management
separate name for the network and mesh devices
design
size
build quality
added guide to configuration in Polish

Disadvantages:

too little functionality - limited only to a simple repeater
lack of Polish language in the application

Call us at (+48) 34 361 04 48 or write to [email protected]

TABLE OF CONTENTS

Arris X5 Mesh extender - WiFi 6 in your home!

Arris X5 Mesh Extender X5042

Contents of the package

Configuration

Tests

Summary